[Release of SxS UDF Driver]
SxS UDF Driver Ver2.5.0 for Mac is released.


[Additional Items in Ver2.5.0]
1.macOS Catalina 10.15. is supportaed.(2020/03/31)
2.Support the mount of SxS Memory Card formatted in UDF by AXS-AR1 and reading /writing of the file.
  Please refer to AXS-AR1 instruction manual for details.




[System Requirements]
 macOS Sierra 10.12.6
 macOS High Sierra 10.13.6
 macOS Mojave 10.14.6
 macOS Catalina 10.15.3

 Processor:
 Intel Core 2 Duo Processor 2.4 GHz or higher

 Memory:
 4 GB or more

 Note:
 These test results may not apply to all computers.


[How to install the SxS UDF Driver]

-Unzip [SxSUDFDriver_2_5_0_mac.zip].  Open [SxSUDFDriver_2_5_0_mac.dmg], and execute the install package.
 Follow the on-screen instructions to install the SxS UDF Driver.

-Installing on macOS 10.13 or 10.14 or 10.15,
 1. Open “Security & Privacy” from “System Preference”and 
 2. Press the "Allow" button on right side of "System Software was blocked from loading..."
 3. Check out the System software of“Sony **** Solutions Corporation”and press “OK”.
 Note:
 If you do not allow it during installation, it will return to its original state after restarting the OS.
 In that case, run the installer again and set the permission of the System software.

-To use SxS memory cards inserted in an ExpressCard slot:
 Install the SxS Device Driver (ver2.0.0 or later).

[Precautions for use]
--Depending on the OS startup conditions, the Standard UDF driver of OS may be applied instead of this product.
    ex. When the OS is started while the SxS Reader/Writer with the UDF formatted SxS memory inserted is connected to the PC
  When the Standard UDF driver is applied, the data transfer speed of the SxS memory is obviously reduced.
  In this case, remove the SxS Reader / Writer from the PC and restart the OS.

------------------------------------------------------------------
2020/3/31